T-RAIN / PRODUCT GUIDE
What to check when pairing sleeve protectors and aprons
Check upper-arm, wrist and garment overlap when pairing K-1000 sleeves with PVC aprons. One size still needs a fitting.
Quick answer
Sleeve protectors cover the arms and aprons cover the front torso. Check gaps created during movement when they are paired. K-1000 being one size does not guarantee identical upper-arm and wrist fit for everyone.
Wrist and upper-arm interfaces
Try the sleeve protector over working clothes. Reach and bend the elbow to observe changes at wrist and upper arm. Check any glove overlap too; do not infer protection of the complete combination from the sleeve material name alone.
Areas the apron leaves exposed
After adjusting apron neck and waist fastenings, check shoulders and sides. Sleeve protectors do not automatically close these gaps. On the order, treat apron and sleeves as separate products and state quantities and packing units clearly.
- Fit with arms reaching and elbows bent.
- Confirm whether the sleeve quantity refers to single pieces or pairs.
Current model data and technical sources
This table uses the same data as product pages and model TDS documents. Fabric mass is in g/m², not finished product weight. Missing fields require confirmation.
| Model / collection | Materials and fabric mass | Sizes / packing | Source |
|---|---|---|---|
| K-1000 | Fabric: PVC fabric · 400 g/m² | One size 20 units | Model TDS Care instructions |
| ON-3000 | Fabric: PVC fabric · 400 g/m² | 70 × 110 cm 50 units | Model TDS Care instructions |
| ON-3001 | Fabric: PVC fabric · 400 g/m² | 70 × 110 cm 50 units | Model TDS Care instructions |
Can I assume sleeve quantities are pairs?
No. Check the published unit and quotation component scope, and confirm the unit in writing.
Continue your research
Talk to T-Rain
Tell us the model, intended use and quantity. We can clarify product information, sampling or bulk-order terms together.
Request product information